Technological characteristics of epoxy/carbon black composites

A. G. Bannov; A. E. Brester; A. A. Shestakov; M. V. Popov; N. I. Lapekin; G. K. Krivyakin

doi:10.1016/j.matpr.2020.05.758

Technological characteristics of epoxy/carbon black composites

A. G. Bannov, A. E. Brester, A. A. Shestakov, M. V. Popov, N. I. Lapekin, G. K. Krivyakin

Лаборатория функциональной диагностики низкоразмерных структур для наноэлектроники

Результат исследования: Научные публикации в периодических изданиях › статья по материалам конференции › рецензирование

1 Цитирования (Scopus)

Аннотация

The set of epoxy composites based on Alfa Aesar^TM carbon black (CB) (0-1.5 wt%) has been prepared. Dependence of shaft torque on the rotation frequency in batch mixer with overhead stirrer for epoxy/ CB system was obtained. Chemical resistance tests of epoxy resin/carbon black composites were carried out by sample immersion in 30% H₂SO₄ and 95% H₂SO₄. The increase of apparent viscosity of epoxy/CB mixture was observed for relatively low temperatures (30-40 °C). Immersion of epoxy/CB composite in concentrated H₂SO₄ induced strong oxidation of sample and mass loss. Dilution of sulfuric acid led to the mass gain of the composite sample due to the increased uptake. The improvement of chemical resistance of epoxy/CB composites was observed in 95% H₂SO₄

Язык оригинала	английский
Страницы (с-по)	496-498
Число страниц	3
Журнал	Materials Today: Proceedings
Том	31
DOI	https://doi.org/10.1016/j.matpr.2020.05.758
Состояние	Опубликовано - 2020
Событие	6th International Russian-Kazakhstan Conference on Chemical Technologies of Functional Materials, RKFM 2020 - Almaty, Казахстан Продолжительность: 9 апр 2020 → 10 апр 2020

Доступ к документу

10.1016/j.matpr.2020.05.758

Ссылка на публикацию в Scopus

Fingerprint Подробные сведения о темах исследования «Technological characteristics of epoxy/carbon black composites». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать

@article{c21f230fab9a442f9800a732c5951fd6,

title = "Technological characteristics of epoxy/carbon black composites",

abstract = "The set of epoxy composites based on Alfa AesarTM carbon black (CB) (0-1.5 wt%) has been prepared. Dependence of shaft torque on the rotation frequency in batch mixer with overhead stirrer for epoxy/ CB system was obtained. Chemical resistance tests of epoxy resin/carbon black composites were carried out by sample immersion in 30% H2SO4 and 95% H2SO4. The increase of apparent viscosity of epoxy/CB mixture was observed for relatively low temperatures (30-40 °C). Immersion of epoxy/CB composite in concentrated H2SO4 induced strong oxidation of sample and mass loss. Dilution of sulfuric acid led to the mass gain of the composite sample due to the increased uptake. The improvement of chemical resistance of epoxy/CB composites was observed in 95% H2SO4",

keywords = "Carbon black, Chemical resistance, Epoxy resin, Uptake, Viscosity, FIBER, EPOXY, GRAPHITE",

author = "Bannov, {A. G.} and Brester, {A. E.} and Shestakov, {A. A.} and Popov, {M. V.} and Lapekin, {N. I.} and Krivyakin, {G. K.}",

note = "Funding Information: The work was carried out within a scope of State task of Ministry of Science and Higher Education of Russia (project no. FSUN-2020-0008 ). Publisher Copyright: {\textcopyright} 2020 Elsevier Ltd. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 6th International Russian-Kazakhstan Conference on Chemical Technologies of Functional Materials, RKFM 2020 ; Conference date: 09-04-2020 Through 10-04-2020",

year = "2020",

doi = "10.1016/j.matpr.2020.05.758",

language = "English",

volume = "31",

pages = "496--498",

journal = "Materials Today: Proceedings",

issn = "2214-7853",

publisher = "Elsevier Science B.V.",

}

Technological characteristics of epoxy/carbon black composites. / Bannov, A. G.; Brester, A. E.; Shestakov, A. A.; Popov, M. V.; Lapekin, N. I.; Krivyakin, G. K.

В: Materials Today: Proceedings, Том 31, 2020, стр. 496-498.

Результат исследования: Научные публикации в периодических изданиях › статья по материалам конференции › рецензирование

TY - JOUR

T1 - Technological characteristics of epoxy/carbon black composites

AU - Bannov, A. G.

AU - Brester, A. E.

AU - Shestakov, A. A.

AU - Popov, M. V.

AU - Lapekin, N. I.

AU - Krivyakin, G. K.

N1 - Funding Information: The work was carried out within a scope of State task of Ministry of Science and Higher Education of Russia (project no. FSUN-2020-0008 ). Publisher Copyright: © 2020 Elsevier Ltd. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.

PY - 2020

Y1 - 2020

N2 - The set of epoxy composites based on Alfa AesarTM carbon black (CB) (0-1.5 wt%) has been prepared. Dependence of shaft torque on the rotation frequency in batch mixer with overhead stirrer for epoxy/ CB system was obtained. Chemical resistance tests of epoxy resin/carbon black composites were carried out by sample immersion in 30% H2SO4 and 95% H2SO4. The increase of apparent viscosity of epoxy/CB mixture was observed for relatively low temperatures (30-40 °C). Immersion of epoxy/CB composite in concentrated H2SO4 induced strong oxidation of sample and mass loss. Dilution of sulfuric acid led to the mass gain of the composite sample due to the increased uptake. The improvement of chemical resistance of epoxy/CB composites was observed in 95% H2SO4

AB - The set of epoxy composites based on Alfa AesarTM carbon black (CB) (0-1.5 wt%) has been prepared. Dependence of shaft torque on the rotation frequency in batch mixer with overhead stirrer for epoxy/ CB system was obtained. Chemical resistance tests of epoxy resin/carbon black composites were carried out by sample immersion in 30% H2SO4 and 95% H2SO4. The increase of apparent viscosity of epoxy/CB mixture was observed for relatively low temperatures (30-40 °C). Immersion of epoxy/CB composite in concentrated H2SO4 induced strong oxidation of sample and mass loss. Dilution of sulfuric acid led to the mass gain of the composite sample due to the increased uptake. The improvement of chemical resistance of epoxy/CB composites was observed in 95% H2SO4

KW - Carbon black

KW - Chemical resistance

KW - Epoxy resin

KW - Uptake

KW - Viscosity

KW - FIBER

KW - EPOXY

KW - GRAPHITE

UR - http://www.scopus.com/inward/record.url?scp=85096544953&partnerID=8YFLogxK

U2 - 10.1016/j.matpr.2020.05.758

DO - 10.1016/j.matpr.2020.05.758

M3 - Conference article

AN - SCOPUS:85096544953

VL - 31

SP - 496

EP - 498

JO - Materials Today: Proceedings

JF - Materials Today: Proceedings

SN - 2214-7853

T2 - 6th International Russian-Kazakhstan Conference on Chemical Technologies of Functional Materials, RKFM 2020

Y2 - 9 April 2020 through 10 April 2020

ER -