Properties of ta-C coatings prepared by pulsed cathodic arc source at various distances

S. Chepkasov, A. Zolkin, D. Piliptsou, E. Gladkikh, K. Kravchuk

Результат исследования: Научные публикации в периодических изданияхстатья по материалам конференции

Аннотация

Tetrahedral amorphous carbon (ta-C) coatings have been prepared on silicon substrates by the pulsed cathodic arc source. For the limitation of the heat flux of the carbon plasma to the sample, the diaphragm of 27 mm diameter has been used. The deposition process has been carried out at three different distances between the arc source and the substrate: 150, 215 and 265 mm. The properties of ta-C coatings have been studied by Raman spectroscopy and dynamic nanoindentation techniques. The analysis of Raman spectra parameters has revealed that the concentration of ordered aromatic rings in Csp2 cluster decreases with distance between the arc source and the substrate while the concentration of chain groups increases. Nanoindentation has shown the decrease in nanohardness and Young's modulus with the distance. Nanohardness value falls from 21 GPa to 16 GPa and Young's modulus value goes down from 197 GPa to 177 GPa. So, it's possible to control the formation of ta-C coatings structure by changing distance between the pulsed cathodic arc source and the substrate.

Язык оригиналаанглийский
Номер статьи032066
Число страниц6
ЖурналJournal of Physics: Conference Series
Том1115
Номер выпуска3
DOI
СостояниеОпубликовано - 27 ноя 2018
Событие6th International Congress on Energy Fluxes and Radiation Effects 2018, EFRE 2018 - Tomsk, Российская Федерация
Продолжительность: 16 сен 201822 сен 2018

Fingerprint Подробные сведения о темах исследования «Properties of ta-C coatings prepared by pulsed cathodic arc source at various distances». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать