Design of Catalytic Polyfunctional Nanomaterials for the Hydrogen Production Processes

D. I. Potemkin, P. V. Snytnikov, S. D. Badmaev, S. I. Uskov, A. M. Gorlova, V. N. Rogozhnikov, A. A. Pechenkin, A. V. Kulikov, V. A. Shilov, N. V. Ruban, V. D. Belyaev, V. A. Sobyanin

Результат исследования: Научные публикации в периодических изданияхстатьярецензирование


The processes of hydrogen production from various types of fossil and renewable fuels are energy-intensive multi-route chemical reactions, and for their efficient implementation it is necessary to use selective and high-performance catalysts that combine high activity, thermal conductivity, and corrosion and thermal resistance. A general strategy for the design of catalytic systems for hydrogen production is outlined; it consists in the use of composite catalysts of the “metal nanoparticles/active oxide nanoparticles/structural oxide component/structured metal support” type; an approach for their directed synthesis is described. The structured metal support provides efficient heat removal or supply for exo- or endothermic reactions, possesses good hydrodynamic characteristics, and facilitates scale transition. The structural oxide component (aluminum oxide) provides thermal and corrosion resistance and a high specific surface area of the catalytic coating, as well as performing a protective function for the metal support. The active oxide component (mainly cerium–zirconium oxides) increases resistance to carbonization due to oxygen mobility and maintains a high dispersion of the active component due to its strong metal–support interaction. Metal nanoparticles 1–2 nm in size are involved in the activation of substrate molecules. FeCrAl alloy wire meshes, formed into cylindrical blocks of specified sizes, to be used as a heat-conducting substrate. By controlled annealing with the formation of a micron α-Al2O3 layer and subsequent deposition of a η-Al2O3 layer according to the Bayer method (through aluminum hydroxide), a structural layer of η-Al2O3 with a “breathing” needle morphology was deposited onto the FeCrAl alloy surface; then the catalytic active component was deposited onto this layer by impregnation and/or deposition. The efficiency of the proposed strategy is shown for Rh/Ce0.75Zr0.25O2 – δ–η-Al2O3/FeCrAl catalysts for methane tri-reforming and Cu–CeO2 – δ/η-Al2O3/FeCrAl catalysts for dimethoxymethane steam reforming.

Язык оригиналаанглийский
Страницы (с-по)308-313
Число страниц6
ЖурналNanotechnologies in Russia
Номер выпуска3-6
СостояниеОпубликовано - мая 2020


Подробные сведения о темах исследования «Design of Catalytic Polyfunctional Nanomaterials for the Hydrogen Production Processes». Вместе они формируют уникальный семантический отпечаток (fingerprint).